I installed OpenBSD 5.1 recently on my new box that’s running Proxmox 2.1. I want OpenBSD to run pf to provide a firewall to protect all the other virtualized hosts on the box. I don’t remember what I put for my default route during the install, and that came back to bite me as I couldn’t get outside of my network. Issuing a ping would resolve a hostname (I run a local DNS server) but then it didn’t have a route to the resolved IP, so it would fail with the error
ping: sendto: No route to host
# ping www.google.com PING www.l.google.com (188.8.131.52): 56 data bytes ping: sendto: No route to host ping: wrote www.l.google.com 64 chars, ret=-1 ping: sendto: No route to host ping: wrote www.l.google.com 64 chars, ret=-1 --- www.l.google.com ping statistics --- 2 packets transmitted, 0 packets received, 100.0% packet loss
It took a bit of digging online, but in the end it was a simple fix; delete the default route and re-add it (I put in my gateway’s IP)
route delete default route add default 192.168.1.1
Now everything works as it should.
# ping www.google.com PING www.l.google.com (184.108.40.206): 56 data bytes 64 bytes from 220.127.116.11: icmp_seq=0 ttl=50 time=40.862 ms 64 bytes from 18.104.22.168: icmp_seq=1 ttl=50 time=38.337 ms 64 bytes from 22.214.171.124: icmp_seq=2 ttl=50 time=38.500 ms --- www.l.google.com ping statistics --- 3 packets transmitted, 3 packets received, 0.0% packet loss round-trip min/avg/max/std-dev = 38.337/39.233/40.862/1.153 ms
Of course use a different IP if your gateway is different, but after that you’ll be like me; all ready to setup pf on the network!